Kaiyuan Kybc Movable Diesel Engine Pump for Irrigation Drainage and Fire Fighting

• Customization: Available
• After-sales Service: 9:00 to 17:00 (China Time)
• Warranty: One Year Warranty After Delivery
• Model NO.: KYBC
• Max.Head: 30-50m
• Max.Capacity: >400 L/min
• Driving Type: Motor / Diesel Engine
• Impeller Number: Single-Stage Pump
• Working Pressure: 0.3~0.6 MPa
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Contact for Detail Info.
• Mounting Height: Contact for Detail Info.
• Impeller: Closed
• Usage: Irrigation, Water Supply, Drainage, Liquid Transfe
• Pump Part Type: Horizontal Centrifugal
• Inlet / Outlet Diameter: 80 to 300 mm
• Color: Regular Color or Color as Request
• Diesel Engine Brand: Chinese Brand or Brand as Request
• Capacity Range: 80~800m3/H
• Head Range: 8~55m
• Power: 7.5~132kw
• Accumulator: 12V / 24V
• Control Panel: Available
• Cooling Method: Water & Fan
• Casing / Impeller / Shaft (Standard): Cast Iron / Cast Iron /45 Steel
• Liquid (Medium) to Be Pumped: Water, Liquid - Chemical Properties Close to Water
• Standard: China National GB Standard
• Place of Production: Shanghai China
• OEM: Available
• Transport Package: Plywood Case
• Specification: according to diameter of inlet and impeller
• Trademark: KAIYUAN
• Origin: China
• HS Code: 8413302100
• Production Capacity: 1000 Sets / Month

Product Description

Product Description

>>> Product Overview
KYBC stationary diesel engine driven self-priming pump is a pump with a novel structure developed on the base of similar technology abroad. The perfect combination of diesel engine and self -priming  pump, together with four-wheel mobile trailer and outdoor shelter makes field operation possible, beyond the restriction of climate. The operation can be controlled both manually and automatically.
Combined self-priming with non-clogging sewage, possessing the structure of axial-flow outer recirculation, the uniquely-designed pump body and impeller channel, diesel engine driven self-priming pump can absorb and discharge liquid with large particles and continuous fiber impurities, just as self-priming fresh water pump, without using bottom valve and pump container for water diversion. This pump is therefore can be widely used in municipal sewage discharge system as well as flood-fighting and emergency rescues. KYBC movable diesel engine driven self-priming is your best choice among all kinds of diesel engine driven self-priming pumps.
Compared with domestic pumps of the same category, diesel engine driven self-priming pump is simpler in its structure, more better at self-priming work and more thoroughly in sewage charging. With its quality indexes taking the leading level in China, it has a good market appeal and promising future.

>>> Scope of Applications
Ambient temperature ≤50°C, medium temperature ≤80°C, for specific job requirements, 200 °C is allowed.
Medium PH level for cast iron is 6-9, for stainless steel is 2-13.
The specific weight of the medium is required below 1240kg/m3
Self-priming lift should be controlled within the range of 4.5~5.5m, the overall length of suction pipes should be no more than 10m(≤10m)
Pipe size capacity: the diameter of suspended particle is 50% of the diameter of the pump, and the length of fiber is 5times of pump's diameter.

>>> Model Meaning
KYBC200-600-14-D

No	Name	Model Meaning
1	KYBC	Kaiyuan Movable Diesel Engine Driven Self-priming Pump
2	200	Inlet and Outlet Diameters 200mm
3	600	Flow Rate 600m3/h
4	14	Pump Head 14m
5	D	Customized

 

>>> Working Conditions
Altitude: ≤2500m
Ambient temperature: -25-55°C
Relative air humidity: 9~95%
Seismic intensity: 7
Flow range: 50~70(l/s)
Head range: 5~70m
Brands of diesel engine: WEICHAI, DONGFENG INSTITUTION, WUXI POWER, CHANGFA, JICHAI, YUCHAI, BEINEI etc.

>>> Structure and Operating Principles
KYBC diesel engine driven self-priming pump is composed of diesel engine, coupling, pump body, impeller, rear cover, mechanical seal, pump spindle, bearing block, imported pump, gas-liquid separator tube, water valve and drain connection. The structure of the pump is shown in the following figure.
Principle of operation: the pump body with fluid reservoir inside and the working chamber of the pump, being connected with each other through the reflowing valve on the upper side and circulation valve beneath it, from the axial-flow outer recirculation system of the pump. When the pump stops working, it already has a volume of liquid reserve inside its fluid reservoir, when the pump runs, the liquid inside is ejected upward with the air flow under the function of impeller, then it reflows into the working cavity through the gas-liquid separator tube, at the same time, the gas exhausted out of the pump, which makes the pump vacuumed inside so as to get self-priming realized.
 

Company Profile

1. Delivery time:

• We put your order into our tight production schedule, keep our client informed about production process, ensure your punctual delivery time.
• Shipping notice/ insurance to you as soon as your order is shipped.

2. After sales service:

• After receiving the goods, We accept ur feedback at first time.
• We could provide installation guide, if you have need, we could give you global service.

3. Professional sales:

• We value every inquiry sent to us and ensure quick competitive offer.
• We cooperate with customer to bid tenders, and  provide all necessory document.
• We are a sales team, with all techinical support from engineer team.

Shanghai Kaiyuan Pump have many global clients, we offer professional service to them.  With the aim of "to establish a close strategic partnership and develop together with customers".  we will work whole heartedly to improve our products and service. We will also pledge to work jointly with businese partners to elevate our cooperation to a higher level and share success with together with our customers. We are looking forward to establishing relationships with you in the near future.   



 

Packaging & Shipping

 

 

FAQ

Q: Are you a factory or trade company?
A: We are a factory, and we sincerely invite you can visit our factory.

Q: Can I custom pumps?
A: Yes, and we strictly keep confidential for every customer.

Q: How can I trust your quality is good?
A: We have the quality standards and quality certifications to ensure the quality our products.

Q: What if we have quality problems with your products?
A: We have one year warranty period for every product.

Q: Whats your MOQ?
A: 1 Piece.

Q: Can I get a free sample?
A: We offer free samples of accessories, such as valves, but you have to pay the freight, sample will be sent within 1 week.