Product Description
>>> Product Overview
KAIYUAN Diesel Engine Water Pump Set for Irrigation with a novel structure developed on the base of similar technology abroad. The perfect combination of diesel engine and end suction pump part, can be installed with four-wheel mobile trailer and outdoor shelter makes field operation possible, beyond the restriction of climate. The operation can be controlled both manually and automatically. This pump is can be used for irrigation, flood-fighting and emergency rescues.
KYC diesel engine pump group series are developed successfully, strictly complying with national standard GB6245-2006. Single stage, single suction and end suction type. Related diesel engine are classical domestic or imported ones, which have feature of stable starting, high capacity compact structure, easy maintenance and high automation, thus, they are fire-protection equipment with advanced and dependable performance.
>>>STRUCTURE & FUNCTIONS:
X61 35, 12V1 35, 4102 4105, 61 02, 4100 495 etc diesel engines series provide power for our pumps. FIrrigation Agriculture pump unit consist of Irrigation Agriculture pump and these diesel engines (also work with clutches), which is attached to high elastic clutches, besides diesel tank, radiation water tank, blower, control screen (for the automation unit) etc components.
Being the auto-control unit, a separate diesel engine auto-control cabinet(Programmable)carries out the system's automatic starting, performance, auto-switching(the motor pump unit is switched to the diesel engine pump one or the diesel engine pump unit to another unit), auto-protection(warning and stopping protection for the diesel engine's over-speed, lower oil pressure, high water temperature, three times of failures in starting, low voltage of accumulator warning etc functions)and also can be connected to fire fighting centers of users or the auto-warning device of fire with the purpose of remote monitoring.
In order To keep the unit working normally below 5, it can be fitted with an AC220V water-cooling pre-heater.
The diesel engine fire-fighting pump group can be formed as an automatic Irrigation Agriculture ware-supply system (see tabel1), with an electric pump and pressure maintaining one, as you can read "Diesel engine control system".
There are two water inlet ways: Self-pouring and suction-up. The former is preferred because of fire-protection standard. If our clients specially ask for suction-up ones, they are required to point out so our company supply automatic vacuum water leading device. However, the change of dimension of the pump unit is necessary.
Control Panel:
Pump Part:
>>>SCOPE OF SUPPLY:
We supply diesel engine (including diesel tank and accumulator) Water pump set for irrigation, high elastic clutch and their pedestal and electric control cabinet for control.
>>> Model Meaning
XBC-SX150-K(Z)6
| No |
Name |
Model Meaning |
| 1 |
XBC |
KAIYUAN Diesel Engine Water Pump for fire fighting |
| 2 |
SX |
SPLIT CASE, Single Stage, Horizontal Pump |
| 3 |
150 |
Inlet Diameters 150mm |
| 4 |
K |
Prototype Impeller |
| 5 |
Z |
Modified impeller |
| 6 |
6 |
1/10 nominal Impeller specific speed |
>>> Working Conditions
Altitude: ≤1000m
Ambient temperature: +5°C~+40°C. (temperature below +5°C, please contact us.)
Medium temperature ≤80°C (for specific job requirements, please contact us.)
Relative air humidity: 9~95%.
Seismic intensity: 7.
Flow range: 6.3~400 (m3/h).
Head range: 5~125m.
Medium PH level for cast iron is 6-9, for stainless steel is 2-13.
Brands of diesel engine: WEICHAI, DONGFENG INSTITUTION, WUXI POWER, CHANGFA, JICHAI, YUCHAI, BEINEI etc.
>>> Structure and Operating Principles
KYC diesel engine driven self-priming pump is composed of diesel engine, coupling, pump body, impeller, rear cover, mechanical seal, pump spindle, bearing block, imported pump, gas-liquid separator tube, water valve and drain connection. The structure of the pump is shown in the following figure.
Principle of operation: the pump body is connected with each other through the reflowing valve on the upper side and circulation valve beneath it, from the axial-flow outer recirculation system of the pump. When the pump stops working, it already has a volume of liquid reserve inside its fluid reservoir, when the pump runs, the liquid inside is ejected upward with the air flow under the function of impeller, then it reflows into the working cavity through the gas-liquid separator tube, at the same time, the gas exhausted out of the pump, which makes the pump vacuumed inside so as to get self-priming realized.
>>> Preparations before Starting Pump
Check the fasteners of the joint parts, such as the pump seat, the coupling and the bearing carrier, and make sure that they would not loosen. If any of them get loose, fasten them.
Check the connecting pipes and make sure that there is gas leakage.
Switch on the water valve on the top of the pump, add a volume of water, which is no less than 2/3 of the pump volume. Then switch off the water valve. The next time start the pump, never need to do water rejection anymore.
Get the power line of the storage battery routed to the power source, when the diesel engine is power-on, press down the starting button of the meter panel, give it a test run to see if it rotates clockwise(counterclockwise rotation is prohibited).
Starting up: add antifreezing solution to the water tank of the diesel engine, and fill the fuel tank with diesel oil, then add some lubricating oil (labeled10w-40) to the engine. Route the power line of the starter to storage battery and pay attention to the positive and negative poles.
>>> Company Information & Advantages
1. Delivery time:
- We put your order into our tight production schedule, keep our client informed about production process, ensure your punctual delivery time.
- Shipping notice/ insurance to you as soon as your order is shipped.
2. After sales service:
- After receiving the goods, We accept ur feedback at first time.
- We could provide installation guide, if you have need, we could give you global service.
3. Professional sales:
- We value every inquiry sent to us and ensure quick competitive offer.
- We cooperate with customer to bid tenders, and provide all necessory document.
- We are a sales team, with all techinical support from engineer team.
Shanghai Kaiyuan Pump have many global clients, we offer professional service to them. With the aim of "to establish a close strategic partnership and develop together with customers". we will work whole heartedly to improve our products and service. We will also pledge to work jointly with businese partners to elevate our cooperation to a higher level and share success with together with our customers. We are looking forward to establishing relationships with you in the near future.
Audited Supplier 
){kind=link}
){kind=link}